AIM Sports EVO5 Datalogger

Please Select Your Vehicle

We will show you products that fit your vehicle

AIM Sports EVO5 Datalogger

$1,699.00

(Typically ships in 2-3 Days)

AIM Sports EVO4s Datalogger with GS dash

AIM Sports MXS 1.2 TFT Dash & Datalogger

AIM Sports EVO5 Datalogger

0 reviews | Write a review

Brands AIM Sports
Product Code: AIM-EVO5
Availability: Typically ships in 2-3 Days

$1,699.00

Qty

Add to Wish List

Compare this Product

EVO5 is the evolution of the traditional datalogger that, all over the years,

has become a standard de facto acquisition system in a huge amount of championships.

With its compact aluminum body, EVO5 can be easily placed in any vehicle.

Its configuration with the new Race Studio 3 software is simple and immediate.

A wide range of sources for your data

EVO5 samples all the information you need: data coming from your vehicle ECU via CAN, RS232 or K-line, from the internal accelerometers and gyro, from the GPS08 Module included in the kit.
And from analog/digital inputs, external expansions as well as predefined math channels. Sensors can be connected to 8 configurable analog channels, to the RPM input and to 4 wheel speed inputs.

ECU connection

Second CAN

Sensors

GPS08 Module

Two digital outputs

EVO5 features two digital outputs.
The two digital outputs (Dout) are LOW SIDE
type (switch to ground): they can be configured
in order to be turned on/off depending on
the value of the analog or digital inputs.
They permit to automatically run external systems,
i.e. to switch on/off additional lights, to activate/
de-activate a cooling fan or circulation pumps,
etc. when a certain event happens.

CAN output

With the CAN Output you can send messages
directly to an existing CAN network in order
to improve the range of vehicle control possibilities.

Internal SD card

The internal SD card permits to record all possible data you may ever need.
The card is protected by a waterproof door equipped with a sensor closing all files when you open it, to prevent any data loss possibility. No way to have a faster data downloading: you remove the SD and... it is done!
Of course a USB connection is available, too.

Wi-Fi connection

Configure the system and download
your data over a secure 802.11 WiFi
connection, even if your car is 100
meters far from you.

Two multi-channel Motorsport
connectors

Two multi-channel Motorsport connectors: simple and straightforward, one top quality harness for ALL your connections.
A 37 pins connector for main applications (power, CAN, AiM CAN network, etc.) and a 22 pins connector for additional functions like CAN2, digital outputs...

Expand your EVO5 as much as you need

Add expansion modules via our built-in CAN bus:

Channel Expansion
It permits to add 4 0-5Volt analog channels for pressure, temperature sensors and potentiometers. Two of these channels can be configured to receive digital inputs like wheel speed.

LCU-One CAN
Wide band Lambda controller LCU-One, with Bosch LSU 4.9 probe, providing all Air/Fuel data and lambda value, allows to perfectly tune the carburetion.

SmartyCam HD cameras
The on-board cameras that overlays on videos the data sampled by your logger.

Memory Module
The Memory Module is a small SD Card holder that can be connected via CAN bus to your AiM logger in order to record the data during your tests.

... and all sensors you may need to improve the EVO5 performance.

Connection example

Available displays

To visualize in real time all the data,
EVO5 can be connected to the visor
GS-Dash or to the Formula Steering Wheel 3,
our professional steering wheel
for Formula and Sports cars.

Download your data to a PC for a professional data analysis

Data recorded by EVO5 can be downloaded to PC and analyzed with the professional Race Studio Analysis software: graphs, histograms and tables will help you evaluate your performance, providing an objective support to avoid mistakes and improve your driving technique.

DOWNLOAD RS3